VP2223 LED light fixture for underpasses and bridges

The product family of the VP2223 LED light fixture is designed for use as a ceiling fixture in e.g. underpasses of walkways and roads, bridges, tunnels, parking garages, outdoor sheds and industrial buildings. The light fixture is mounted in surface mounting to the ceiling structure.


The VP2223 LED light fixture is available in three different colors and in three different efficiencies and sizes. The light fixtures in the pictures are equipped with vandalism shields (available as accessories).  

The front panel of the light fixture is hinged to the back part, which is fastened to the ceiling structure. This makes it easier to install the light fixture and make the electrical connections. Electrical cabling can be brought to the light fixtures either from two sides or from the back, and the cabling can be chained. 

For a LED light fixture, it is important to have good thermal management. The heat is dissipated from electronics with the help of the large aluminium front panel. The effective cooling leads on to high energy efficiency and durable lighting capability. The LED modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture.


Technical properties

  VP2223 M1  VP2223 M2  VP2223 M3  VP2223 M4
 Oprating voltage  230VAC/50Hz, protection class I 
 Input power  11 W  22 W  33W  44 W
 Useful quantiy of light  900 lm  1800 lm  2700 lm  3600 lm
 Power ratio  > 0,9c
 Color temperature
 of the light
 4100 K. Customer-specific colour temperatures possible, with limitations
 from the LED manufacturer.
 Encapsulation  IP 44 (LED modules and connection device min. IP65).
 Operating temperature  -40…+40 °C (-40…+100 F)
 Measurements, w x l x h  200 x 200 x 47 (mm)  200 x 400 x 47 (mm)  200 x 400 x 47 (mm)  400 x 400 x 47 (mm)
 Materials  Metalwork painted (stoved) aluminium and stainless steel.
 Color  Black, grey and white, other colors possible.
 Fastening  Screw fastening to roof.
 Connection  5 x 2,5 mm2 -o-
 LED lumen maintenance  Typically less than 10%/100 000 h




Vandalism shield. Installed on top of the LED module and optical lens to protect against mischief and vandalism. Protects from spray paints and decreases the risk of mechanical strain and damage. UV protected polycarbonate. Seal and screws included in the package. NB! Order one shield for each led module in the light fixture.




NB! Due to the R&D; stage of our products, we reserve the right to make changes at any time without further notice.

Download the brochure as a PDF: