VP2221 LED light fixtures for underpasses and bridges
The product family of the VP2221 LED light fixtures are designed for use as a ceiling light fixture in e.g. underpasses of walkways and roads, bridge structures, parking garages, outdoor sheds and industrial buildings. The light fixture is mounted in buried laying, where it is mounted to the slot in a way that only the exothermic panel and the light emitting lens of the LED modules are left visible under the ceiling structure. All the other parts of the light fixture are situated inside the ceiling structure. The light fixture is structurally durable and safe. The mechanical strain that is generated by the traffic in street lighting locations and possible vandalism have been taken into considetion during the product development phase.
The VP2221 LED light fixtures are used e.g. for lighting of underpasses.
For a LED light fixture, it is important to have good thermal management. The heat is dissipated from electronics with the help of the large aluminium front panel. The effective cooling leads on to high energy efficiency and durable lighting capability. The LED modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture.
The best applicable optical solutions for this light fixture are different from street light fixtures, because the application is different. Lens V9 is suitable for low underpasses and lens V8 for high underpasses. See all optical solutions from the product technology page.
|VP2221 M1||VP2221 M2||VP2221 M3||VP2221 M4||VP2221 M6|
|Operating voltage||230VAC/50Hz, protection class I|
|Input power||11 W||22 W||33 W||44 W||55 W|
|Useful quantity of light||900 lm||1800 lm||2700 lm||3600 lm||5400 lm|
|Power ratio||> 0,9c||According to standard |
| 4100 K. Customer-specific colour temperatures possible, with limitations |
from the LED manufacturer.
|Encapsulation||IP 44 / IP 65|
|Operating temperature||-40…+40 °C (-40…+100 F)|
|Measurements, w x l x h (mm)||S: 200 x 200 x 60||S: 400 x 200 x 60||600 x 430 x 56||600 x 430 x 56||600 x 430 x 56|
|L: 600 x 430 x 60||L: 600 x 430 x 60|
|Materials||Metalwork anodised or painted (stoved) aluminium and stainless steel|
|Colour||Standard colour is grey, other colours possible|
|Fastening||Screw fastening to roof material|
|LED lumen maintenance||Typically less than 10%/100 000 h|
Vandalism shield. Installed on top of the LED module and optical lens to protect against mischief and vandalism. Protects from spray paints and decreases the risk of mechanical strain and damage. UV protected polycarbonate. Seal and screws included in the package. NB! Order one shield for each led module in the light fixture.
Flush mounting frame. The VP2221 LED light fixtures can be installed to the underside of bridges with this flush mounting frame in new building bridge sites. With the aid of this installation case, the electrical tubing will be easier and wooden molds for the fixtures are no longer needed. The light fixtures can be easily installed into the case after the bridge building is finished. Read more.
NB! Due to the R&D; stage of our products, we reserve the right to make changes at any time without further notice.