VP1302 LED street light fixtures

The product family of VP1302 street lights has been developed for street lighting, as well as area lighting. In addition, the light fixture is also suitable to e.g. lighting of sports tracks. The light fixture is available in both one-sided and two-sided versions, thus making it possible to vary the light fixture type within the lighted area to carry out first-class lighting plans. The light fixture is suited for new installations, as well as for replacement of old light fixtures. The light fixture can be installed to an upright pole, the one-sided version also to horizontal shaft. The installation angle can be adjusted in 5° steps with the help of the hinge, which makes the light fixture fit to existing pole and shaft structures. 





For a LED light fixture, it is important to have good thermal management. The heat is dissipated from electronics with the heat transfer capability of the aluminum body, which has led on to high energy efficiency and reliability. Durable lighting capability is achieved with the help of high class LEDs and the low level strain that is put on them. The LED modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture.


Technical properties

 VP1302 M2   VP1302 M3  VP1302 M4  VP1302 M5  VP1302 M6  VP1302 M2+M6  VP1302 M6+M6
Operating voltage  230VAC/50Hz, protection class I
Input power  22 W  30 W  39 W  48 W  56 W  73 W  105 W
Useful quantity of light  1800 lm  2700 lm  3600 lm  4500 lm  5400 lm 1800 lm + 5400 lm 5400 lm + 5400 lm
Power ratio  > 0,9c  According to standard EN 61000-3-2.
Colour temperature 
of the light
4100 K. Customer-specific colour temperatures possible, with limitations from the LED manufacturer.
Light distribution  All Valopaa’s optical lenses are suitable for the VP1302 LED light fixtures. More files of light
 distribution can be found from the product technology pages.
    with lens V12  VP1302_M3 _V12.ldt  VP1302_M4 _V12.ldt  VP1302_M5 _V12.ldt  VP1302_M6 _V12.ldt
Encapsulation  IP65
Operating temperature  -40…+40 °C (-40…+100 F)
 w x l x h (mm)

 228 x 172 x 50  281 x 172 x 50  334 x 172 x 50  387 x 172 x 50  440 x 172x 50
    Pole adaptor:   h 420, Ø 80
Materials  Metalwork anodised or painted (stoved) aluminium and stainless steel.
Colour  Black, white or grey, other colours possible.
Fastening  60 mm tube, vertical and horizontal installation, fine-tuning in 5° steps.
Connection  3 x 2,5 mm2 –o
LED lumen maintenance  Typically less than 10%/100 000 h (read more). 

 NB! Light fixtures are available in one-sided and two-sided versions, and in all different combinations in addition to those presented in the table above.

NB! Due to the R&D; stage of our products, we reserve the right to make changes at any time without further notice.

Download the brochure as a PDF: