VP1301 LED street light fixture

The product family of VP1301 street lights has been developed for street and slow traffic road lighting, and it was approved by the Finnish Transport Agency. The light fixture is suited for new installations, as well as for replacement of old light fixtures. The light fixture can be installed to both horizontal and vertical shaft. The installation angle can be adjusted in 5° steps with the help of the hinge, which makes the light fixture fit to existing pole and shaft structures. The VP1301 product family includes light fixtures with the quantity of light ranging from 4000 lumen to 13000 lumen. In addition to street lighting, the light fixture is also suitable to area lighting.

For a LED light fixture, it is important to have good thermal management. The heat is dissipated from electronics with the heat transfer capability of the aluminum body, which has led on to high energy efficiency and reliability. Durable lighting capability is achieved with the help of high class LEDs and the low level of strain that is put on them. The LED modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture.

There are two sizes available of the VP1301 led street light: versions M5 to M8 have their modules in one row, and version M10 and up have their modules in two rows.

 

Technical properties

  VP1301 M5 VP1301 M6  VP1301 M7   VP1301 M8  VP1301 M10  VP1301 M12  VP1301 M14  VP1301 M16
Operating voltage  230VAC/50Hz, protection class I
Input power (350 mA)    (1)  48 W  56 W  64 W  73 W  88 W  105 W  122 W  138 W 
Useful quantity of light      (1)  4500 lm  5400 lm  6300 lm  7200 lm  9000 lm  10800 lm  12600 lm  14400 lm
Input power (700 mA)    (2)   92 W   109 W   117 W   144 W
 Useful quantity of light      (2)   8000 lm   9600 lm   11200 lm  12800 lm
 Power ratio  According to standard EN 61000-3-2.
 Colour temperature of the light  4100 K. Customer-specific colour temperatures possible, with limitations from the LED manufacturer.
 Light distribution  All Valopaa’s optical lenses are suitable for the VP1301 LED light fixtures. More files of light distribution can be found from the product technology pages.
  with lens V12  VP1301_M5 _V12.ldt  VP1301_M6 _V12.ldt  VP1301_M7 _V12.ldt  VP1301_M8 _V12.ldt  VP1301_M10 _V12.ldt  VP1301_M12 _V12.ldt  VP1301_M14 _V12.ldt  VP1301_M16 _V12.ldt
 Encapsulation  IP65 (installed)
 Operating temperature  -40…+40 °C (-40…+100 F)
 Measurements,
 w x l x h (mm)
 620 x 170 x 125  630 x 170 x 125  620 x 223 x 125  630 x 223 x 125
 Weight  5 kg  5.5 kg  6.5 kg  7 kg
 Materials  Metalwork painted (stoved) aluminium and stainless steel
 Colour  Grey, other colours possible 
 Fastening  Ø 59-63 mm tube, vertical and horizontal installation, fine-tuning in 5° steps.
 Wiring with spring coupling, overhead cables also possible.  
Connection  3 x 2,5 mm2 –o
LED lumen maintenance  Typically less than 10%/100000h (1), 50000h (2) (read more)

 

NB! Due to the R&D; stage of our products, we reserve the right to make changes at any time without further notice.

Download the brochure as a PDF: