VP3411 LED floodlight fixture 

(Note! The earlier version of this product was VP3311)

VP3411 LED floodlight fixtures have been developed for spotlighting and area lighting. The light fixtures can be used as working lighting, or to liven up courtyards, parks, buildings and other objects and targets. They are installed in srew fastening to ceiling, wall or poles. In addition, their installation angle can be adjusted in a continuous manner so that the light can be aligned as needed. The light fixtures can also be used in street lighting if they are installed above streets to wire ropes or bridge structures.

The LED floodlight fixtures are suited to both indoor and outdoor use. Available also with ready installed power cable, which makes the light fixtures easy to install and move according to needs, e.g. at construction sites. 

  

For a LED light fixture, it is important to have good thermal management. The heat is dissipated from electronics with the heat transfer capability of the aluminum body, which has led on to high energy efficiency and reliability. Durable lighting capability is achieved with the help of high class LEDs and the low level strain that is put on them. The LED modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture.

 

 

Technical properties

VP3411 M2 VP3411 M4 VP3411 M8 VP3411 M16 VP3411i M4 VP3411i M8
Operating voltage 230VAC/50Hz, protection class I
Input power 22 W (1) 39 W (1)    75 W (2) 73 W (1)
144 W (2)
138 W (1)       288 W (2)  0, 14-53 W 0, 30-102 W
Useful quantity of light 1800 lm (1) 3600 lm (1) 
6400 lm (2)
7200 lm (1) 
12800 lm (2)
14400 lm (1) 25600 lm (2) 0, 1150-
4800 lm
0, 2200-
9600 lm
Power ratio > 0,9c According to standard EN 61000-3-2.
Colour temperature
of the light
4100 K. Customer-specific colour temperatures possible, with limitations from the LED manufacturer.
Encapsulation IP65
Operating temperature -40…+40 ºC (-40…+100 F)
Measurements, w x l x h (height: without/with shaft) 260 x 205 x 130/180 mm 348 x 192 x 177 mm 360 x 213 x 130/232 mm  370 x 510 x 160/400 mm 348 x 192 x 177 mm 360 x 213 x 130/232 mm
Materials Metalwork painted (stoved) aluminium and stainless steel.
Colour Grey, other colours possible.
Fastening Screw fastening to ceiling, wall or pole.
Connection 5 x 2,5 mm2 –o–
LED lumen maintenance Typically less than 10%/100 000 h (1), 10%/50 000 h (2). Compensated.

   VP3411 LED street light fixture is available in different versions with 350 mA (1) or 700 mA (2) LED current.

NB! Due to the R&D; stage of our products, we reserve the right to make changes at any time without further notice.