VP3232 LED floodlight fixture 

The VP3232 LED floodlight fixture has been developed for spotlighting and area lighting. The light fixture can be used as working lighting, or to liven up courtyards, parks, buildings and other objects and targets. It is installed in srew fastening to ceiling, wall or poles. In addition, its installation angle can be adjusted in a continuous manner so that the light can be aligned as needed.

The LED floodlight fixture is suited to both indoor and outdoor use. Available also with ready installed power cable, which makes the light fixture easy to install and move according to needs, e.g. at construction sites. 

  

For a LED light fixture, it is important to have good thermal management. The heat is dissipated from electronics with the heat transfer capability of the aluminum body, which has led on to high energy efficiency and reliability. Durable lighting capability is achieved with the help of high class LEDs and the low level strain that is put on them. The LED modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture.

 

Technical properties

 VP3232 M1
 Operating voltage  230VAC/50Hz, protection class I
 Input power  11 W
 Useful quantity of light  900 lm
 Power ratio  > 0,9c
 Colour temperature
 of the light
 4100 K. Customer-specific colour temperatures possible, with limitations  
 from the LED manufacturer.
 Encapsulation  IP44 (LED modules and driver min. IP65)
 Operating temperature  -40...+40 ºC (-40…+100 F)
 Measurements, w x l x h (mm)
 (height: without/with shaft)
 190 x 90 x 90/130
 Materials  Metalwork painted (stoved) aluminium and stainless steel.
 Colour  Grey, other colours possible.
 Fastening  Screw fastening to ceiling, wall or pole.
 Connection  5 x 2,5 mm2 –o–
 LED lumen maintenance  Typically less than 10%/100 000 h.

 

 

NB! Due to the R&D; stage of our products, we reserve the right to make changes at any time without further notice.

Download the brochure as a PDF: